Zigbee
Aeotec Water Leak Sensor
Product details
Features
- Zigbee 3.0
- Monitors water leaks and flooding
- Monitors temperature
- Alerts your compatible hub when the sensor detects water or the temperature changes
Tech Specs
- Power: 1x CR2 Battery
- Signal (Frequency): 2.4GHz
- Operating Temperature Range: 32-104° F (0-40° C)
- Operating Humidity Range: 8% - 80% RH
- Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
- Dimensions: Length = 2.32" (60 mm), Height = 0.79" (24 mm), Width = 1.65" (36 mm)
- IP Rating: IP20
- FCC Certified: Yes
- IC Certified: Yes
- Zigbee Certified: Yes
For indoor use only.
Documents
The digital manual can be found on Aeotec's website: Water Leak Sensor Digital Manual
Compatible Hubs
The Aeotec Water Leak Sensor works with the following platforms (if you do not see your hub listed, please reach out to support):
SmartThings
Home Assistant - ZHA
Home Assistant - Zigbee2MQTT
Hubitat
Amazon Echo*
*Requires a compatible version. See Amazon Echo Compatibility Chart.
Included in the Box
1x Water Leak Sensor
1x CR2 Battery
Instruction Manual
Detect water from above that drips down onto the sensor.
Detect water that has leaked onto the floor.
Insert the included CR2 battery and enjoy up to a year of battery life.
Detect and get notified if/when the temperature changes.
Pair with Your Favorite Inovelli Switch
Have your Inovelli smart switches notify you via the color LED Bar if your Aeotec Water Leak Sensor detects water.
Set your switch to blink blue if your sensor detects water or have it pulse orange if your sensor detects a change in temperature.
FAQs
Does this sensor require a hub?
Yes, this sensor requires a hub that supports Zigbee.
Does the package include a battery?
Yes, the package comes with one CR2 battery.
Can you plug this sensor in via a USB cord?
No, this sensor cannot be plugged into the wall.