Zigbee
Aeotec Button
Product details
Features
- Zigbee 3.0
- Monitors temperature
- Three different button presses (tap 1x, tap 2x, hold) which can activate your favorite scenes (ie: Tap 1x = turns off lights, closes garage doors, locks doors, and sets temp to 68 for bed time)
- Low profile and small size (just over 1.5" in diameter and .5" in height)
Tech Specs
- Power: 1x CR2450 Battery
- Signal (Frequency): 2.4GHz
- Operating Temperature Range: 32-104° F (0-40° C)
- Operating Humidity Range: 8% - 80% RH
- Range: Up to 100 meters line of sight between the Wireless Controller (HUB) and the closest Zigbee Module
- Dimensions: Length = 1.61" (41 mm), Height = 0.58" (15 mm), Width = 1.61" (41 mm)
- FCC Certified: Yes
- IC Certified: Yes
- Zigbee Certified: Yes
For indoor use only.
Documents
The digital manual can be found on Aeotec's website: Button Digital Manual
Compatible Hubs
The Aeotec Water Leak Sensor works with the following platforms (if you do not see your hub listed, please reach out to support):
SmartThings
Home Assistant - ZHA
Home Assistant - Zigbee2MQTT
Hubitat
Included in the Box
1x Button
1x CR2450 Battery
1x Instruction Manual
Add up to 3 different scenes. Put it on your nightstand to activate a bedtime scene. Put it on your wall to activate a security scene. Finally, put it by the couch to activate a movie scene.
Set an automation to turn on the heat or air-conditioning if your button reads a certain temperature.
Use the magnetic backing to mount to your wall. Or simply leave it on a counter for easy access.
Pair with Your Favorite Inovelli Switch
Tap your button to turn off all your Inovelli smart switches for bedtime or double-tap your button to turn all the LED Bars red to indicate dinner time for the kids.
Set up your favorite scenes with the Aeotec button -- the sky is the limit!
FAQs
Does this button require a hub?
Yes, this button requires a hub that supports Zigbee.
Does the package include a battery?
Yes, the package comes with one CR2450 battery.